Oregon Black Walnut - 10+ Feet Long Natural Edge Slabs

The below shown slabs are 10 ½ Feet Long – approximately 3 1/2 Inches Thick and have Two Natural Edges

The top side of the slab is shown and the next slab in the sequence is the bottom side of the slab. Slab numbers correspond to cut dates.  

Prices are based on cash and carry.  Shipping is available - estimated cost for crating, and shipping in USA $350-$650 in USA.

These slabs were cut in June 2008 and have been air drying since.  They can be kiln dried (3-4 months) for an additional  $400.

62508-1 30”x 89” – All Sap wood on top side as shown.  Bottom side as pictured below. $995

62508-2 29-33” x 127” Considerable sap wood on side shown. Bottom side as pictured below.  $1915

62508-3 35-41” x 126” Top side shown.  Bottom side as pictured below.  $2390

62508-4 38-45” x 126" Top side shown.  Bottom side as pictured below.  $2633

SOLD

62608-1 43-50”x126” Top side shown.  Bottom side as pictured below. $2940



62608-2 48-55 x126" crack down middle (bottom has defect down middle corresponding to picture shown below) $3245

Picture shown to illustrate bottom of above slab - Two slabs were created from each cut of the bottom section of the logs and are listed on the single natural edge long slabs page.

Return to Top

 


Our hardwood lumber is sawn on a bandsaw, typically kiln dried to 6-8% and has not been surfaced on any sides.  Large slabs are milled with an Alaska Mill and are air dried/drying.
 


Zapponet Computer Services, Rainier, Oregon
Contact Dave & Betty Weinberg
Copyright© 2008 Zapponet Computer Services
All rights reserved.